background image

2

NOTE: Changes, improvements and information may be updated at any time to 

this manual online, so please check you have the latest version of this manual. 

You can check this by reading the version number/date at the front of the 

manual and comparing it to the online version. 

Great attention has been taken to ensure that the information in this manual 

is correct, to provide you with the guidelines for proper safety, assembly and 

operation of this machine.

This manual provides critical safety instructions on the proper setup, operation, 

maintenance and service of your machine. Save this document, refer to it often 

and use it to instruct others on correct operation.

Failure to read, understand and follow the instructions in this manual may result 

in serious personal injury - including amputation, electrocution or even death.

It is the owners sole responsibility for the safe use of this machine. The 

responsibility includes, but is not limited to proper installation in a safe 

environment; personal training and usage authorisation; proper inspection and 

maintenance; manual availability and comprehension; the application of safety 

devices; the usage of personal protective equipment.

The manufacturer will not be held liable for injury or property damage from 

negligence, improper training, machine modifications or misuse.

Содержание SBD-15























Отзывы: