Sherwood RD-8504 Скачать руководство пользователя

Страница: 49 / 68

• You can adjust the current channel levels as desired. These adjusted levels are just memorized into user’s memory

("Calibrate"), not into preset memory("Save 1(Movie)", "Save 2(Music)").

• After adjusting each channel level with test tone, adjust the channel levels either according to the program sources or to suit

your tastes.(For details, refer to "Adjusting each channel level with test tone" on page 24.)

• The LFE level can be adjusted within the range of -10 ~ 0 dB and other channel levels within the range of -15 ~ +15 dB
• In general, we recommend the LFE level to be adjusted to 0 dB.(However, the recommended LFE level for some early DTS

software is -10 dB.) If the recommended levels seem too high, lower setting as necessary.

• When the CURSOR LEFT button is pressed on the setting menu, the previous menu will be returned to.

When selecting the Channel Level

Press the CURSOR UP/DOWN buttons to select the Channel Level, then press the CURSOR RIGHT button
to enter the setting menu.

Repeat the above steps 2 and 3 to adjust each channel level.

Press the CURSOR UP/DOWN buttons to adjust the level of the selected channel or program source’s LFE

as desired.

■

When selecting the LFE

• Press the CURSOR UP/DOWN buttons to select the desired program source’s LFE, then press the CURSOR RIGHT

button to enter its setting menu.

■

Note :

• Depending on the speaker settings(“No”, etc.), some channels cannot be selected.

Press the CURSOR UP/DOWN buttons to select the desired channel(, not “MODE”), then press the

CURSOR RIGHT button to enter its setting menu.

MODE
Front Left
Center
Front Right
Surround Right
Surr Back Right
Surr Back Left
Surround Left
Subwoofer
LFE

BACK

RD-8504(G)_ENG_091217:RD-8504(G) 2009-12-21 오 11:36 페이지 49

Содержание RD-8504





































































Результаты поиска

Содержание RD-8504

Отзывы:

Похожие инструкции для RD-8504

Бренды по названию

Популярные бренды

Sherwood RD-8504, Руководство по эксплуатации

Результаты поиска

Содержание RD-8504

Отзывы:

Похожие инструкции для RD-8504

Бренды по названию

Популярные бренды