Sherwood RD-6505, Руководство по эксплуатации, Страница: 30 / 42

E
N
G
L
IS
H
30
OFF : To listen to a program source without the tone effect. ("DIR" indicator lights up.)
↕
ON : To adjust the tone for your taste. ("DIR" indicator goes off.)
■
When the TONE is set to ON to adjust the tone (bass and treble)
①
Press the CURSOR UP(
▲
)/DOWN(
▼
) buttons to select the desired tone.
• The tone level can be adjusted within the range of -10
~ +10 dB.
• In general, we recommend the bass and treble to be
adjusted to 0 dB (flat level).
• Extreme settings at high volume may damage your
speakers.
• To complete tone adjustment, repeat the above steps
①
and
②
.
②
Press the CURSOR LEFT(
◀
)/RIGHT(
▶
) buttons to adjust the selected tone as desired.
When selecting the TONE
When selecting the BASS
• The HDMI connection can carry uncompressed digital video signals and digital audio signals.
Depending on whether the digital audio signals input into the HDMI IN are output from the HDMI MONITOR OUT of this
receiver or not, you should set the HDMI correctly.
OFF : Not to output the HDMI digital audio signals from the HDMI MONITOR OUT of this receiver, meaning these
signals are heard from the speakers connected to this receiver.
↕
ON : To output the HDMI digital audio signals from the HDMI MONITOR OUT, meaning these signals are heard from
the speakers of your TV.
■
Note:
• When the HDMI is set to ON, the HDMI digital audio signals will not be heard from the speakers connected to this
receiver.
When selecting the HDMI
RD-6505(E)_ENG_100517_RD-6505(E)_ENG 2010-05-24 오전 9:59 페이지 30