Sherwood Scuba AMPHOS AIR 2.0, Руководство пользователя

Страница: 36 / 54

36
AMPHOS AIR 2.0 DC MANUAL
© Pelagic, 2019 Doc. No. 12-79 3 9 -r01 (11/12/19 )
DIGITAL GAUGE MODE
When Digital Gauge Mode (GAUG) is selected as the operating mode, the AMPHOS AIR 2.0 will operate as a Digital Depth Gauge/Timer
with Pressure and ATR without performing nitrogen and oxygen calculations.
• M (2 sec), while the NORM SURF Main is displayed, will access GAUG SURF Main.
• M (< 2 sec), while the graphic GAU is flashing, will select GAUG as the operating dive mode. The graphic GAU becomes solid and
GAUG Mode is selected.
• If no GAUG dive has been conducted, M (2 sec) will access FREE SURF Main.
GAUG SURF MAIN, information includes (Fig. 98) -
> TRT (Transmitter) Link icon, if in use, flashing during lost signal.
> Graphic GAU (indicating mode).
> Number of recent dive completed (0 if no dive made yet) with DIVE icon.
> Surface Interval Time (hr:min) with SURF icon.
> TRT (tank) 1 icon, 1 is the default on surface.
> Tank Pressure with PSI (or BAR) icon.
> Battery icon if a Low Battery warning condition exists.
• A (2 sec) will access GAUG SURF ALT.
• A (< 2 sec) will access Log Mode, then again History. See page 21.
• A + S (2 sec) will access the Set Modes. See page 16.
• M (2 sec), if no GAUG dive yet, will access FREE Surface Main, then NORM Surface Main.
• M (< 2 sec) will revert to Watch Default Time.
• S (< 2 sec), after a dive, will access Time to Fly.
See page 21.
• L (press) will activate the Backlight.
• S (2 sec) will activate the AMPHOS AIR 2.0's Receiver and access a series of screens that will indicate the Status of the system's Batteries
and Pressures of the Tanks in use.
• Each Status screen will be displayed for 3 seconds.
>> AMPHOS AIR 2.0 Battery Status, then TRT 1 Battery/Pressure, then TRT2. Operation will then revert to GAUG SURF Main.
• If a Transmitter (TRT) is not active and linked to the AMPHOS AIR 2.0, a Not Available message will appear.
GAUG SURF ALT
, information includes (Fig. 99):
> Altitude graphic EL2 to EL7, if above 3000 feet (915 meters), blank if Sea level.
> Time of Day (hr:min).
> Temperature with ° icon and graphic F (or C).
• A (< 2 sec) will revert to GAUG SURF Main.
• After 5 sec, operation will revert to GAUG SURF Main.
• L (press) will activate the Backlight.
GAUGE DIVE MAIN,
information includes (Fig. 100) -
> Link icon, if a TRT is in use, flashing during Lost Link.
> Elapsed Dive Time (hr:min) with DIVE icon.
> Current Depth with FT (or M) icon.
> Air Time Remaining (min) with ATR and min icons.
> Tank Pressure with PSI (or BAR) icon, if a TRT is in use, if a TRT is in use.
> TRT (tank) icon, one in use (1 or 2).
> ASC, while ascending, flashing when too fast.
• A (< 2 sec) to access ALT.
• M (2 sec) to access the TRT 1 Switch Preview.
• S (< 2 sec) to acknowledge/silence alarms.
• L (press) to activate Backlight.
GAUG DIVE ALT,
information includes (Fig. 101) -
> Max Depth with MAX and FT (or M) icons.
> Time of Day (hr:min).
> Temperature with ° icon and graphic F (or C).
• A (< 2 sec) to revert to Main.
• Operation will revert to Main after 5 seconds, if A is not pressed.
• L (press) to activate Backlight.
Fig. 98 - GAUG SURF MAIN
Fig. 100 - GAUG DIVE MAIN
Fig. 101 - GAUG DIVE ALT
Fig. 99 - GAUG SURF ALT