Sherwin-Williams Tradeworks, Руководство по эксплуатации

Страница: 3 / 42

CM-Direct Driven Operator's Manual 2008 3
introduction
Congratulations on the purchase of your new Tradeworks® pressure washer! You can be assured your Tradeworks®
pressure washer was constructed with the highest level of precision and accuracy. Each component has been rigorously
tested by technicians to ensure the quality, endurance and performance of this unit. With over twenty five years of
experience in building pressure washers, you have made a wise decision to go with a Tradeworks® pressure washer.
This operator's manual was compiled for your benefit. Reading and following the simple safety, installation, operation,
maintenance and troubleshooting steps described in this manual, will help further extend the trouble free operation you
can expect from your new Tradeworks® pressure washer. The contents of this manual are based on the latest product
information available at the time of publication. The manufacturer reserves the right to make changes in price, color,
materials, equipment, specifications or models at any time without notice.
! important !
these paragraphs are surrounded by a "safety alert boX". this box is used to designate and
emphasize safety warnings that must be followed when operating this pressure washer.
accompanying the safety warnings are "signal words" which designate the degree or level
of hazard seriousness. the "signal words" used in this manual are as follows:
DANGER : indicates an imminently hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING : indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION : indicates a potentially hazardous situation which, if not avoided may
result in minor or moderate injury.
the symbol set to the left of this paragraph is a "safety alert symbol". this symbol is used
to call attention to items or procedures that could be dangerous to you or other persons
using this equipment.
always proVide a copy of tHis manual to anyone using tHis eQuipment. read
all instructions before operating tHis pressure wasHer and especially
point out tHe "safety warnings" to preVent tHe possibility of personal
inJury to tHe operator.
Once the unit has been uncrated, write in the serial number of your unit in the space provided below.
serial number_________________________________
Inspect the contents of the carton for damage. If something appears to be damaged, DO NOT RETURN TO PLACE OF
PURCHASE. Contact your Tradeworks® Customer Service Representative at 800-553-9053.
Please have the following information available for all service calls:
. Model Number
2. Serial Number
3. Date and Place of Purchase
Mi-T-M Corporation
8650 Enterprise Drive
Peosta, IA 52068-0050