Sherman + Reilly PLW-250-4-T, Операция, обслуживание и запчасти

Страница: 17 / 62

3.7
Section 3 • OPERATION
PRE-OPERATION INSPECTION
It is recommended pre-operation inspection be
done before leaving the yard or garage.
Check fuel level on tank gauge.
Check engine oil and radiator coolant levels.
It is necessary to remove the engine cover to
make these checks. Be sure they are replaced
and latched in position properly.
Check hydraulic fluid level in reservoir.
As you continue the inspection, look for struc-
tural damage, bent or broken parts, cracked or
broken welds, missing pins and retainers.
Inspect pump and hoses for loose fittings,
leaking fluid, damaged hoses.
Inspect drive motor/gear box and brake.
Inspect drive chain for proper lubrication and
excessive wear.
Check chain tension and make sure the chain
guard is secure.
Inspect pillow block bearings on reel shafts (6
locations).
Inspect disc brake assemblies (4 locations).
Check reel locks for damage (4 locations).
Inspect level wind. Make sure the rollers move
freely. Check cylinders and hoses for fluid
leaks. Check for hose damage.
Make sure locking couplings operate correctly
and are not damaged (4 locations).
Start the engine
Start-Up Procedure
• Make sure all controls are in neutral and
parking brake is on.
• Start the engine.
•
Refer to engine manufacturer’s manual for
complete starting instructions.
•
•
Never add ETHER to fuel to start cold engine.
Ether WILL damage small diesel engines.
• Check engine oil pressure and ammeter to
be sure everything is working properly.
• Check hydraulic filter indicators (2) to be
sure the filter is serviceable.
• With the engine running, move each control
lever to make sure the lever moves easily
and the function operates correctly.
Shut the engine down.
CAUTION
NOTE
NOTE
NOTE
NOTE