SHERCO 250 SE-R 2017, Руководство по ремонту

Страница: 35 / 54

35
ENGINE COMPONENTS
❱❘
Reed valves, intake manifold
- Over time the carbon reeds can lose their
elasticity which will cause a loss of power.
- Replace worn or damaged reeds.
- Check the condition of the intake manifold;
make sure that it is not cracked.
❱❘
Clutch
- Clutch release bearing assembly [3] check for wear
- Rod [8] check for wear. Minimum length: 194.7 mm
- Springs [17] Check their length. Minimum length 45 mm. All 6 must be replaced if any are out of spec.
- 8 friction discs [14] Minimum thickness 2.68 mm.
- The 7 steel discs must be in good condition with a maximum deformation of 0.05 mm.