Sherbourn PT-7030, Руководство пользователя

Страница: 25 / 53

Page 20
PT-7030: User Manual
Note: Typically all bass management is done by the PT-7030. If your main or surround
speakers are not full range, then they should be configured as “small” in the PT-7030 setup
menu, and appropriate crossover points should be set for them. Since advanced bass
management is performed by the PT-7030, any crossovers or other frequency modification
options on your main and surround channel amplifiers, and any crossover controls on
your powered subwoofer or subwoofer amplifier, should be set to “flat” or “direct”. If your
subwoofer has a non-defeatable internal crossover, it should be set to the highest allowed
crossover frequency to minimize interference with the bass management in the PT-7030.
Note: 7.1 Balanced Outputs and 7.1 Unbalanced Outputs provide the same output signal,
and both are always active. You may use unbalanced connections for some channels and
balanced connections for others if desired. (To ensure the best possible audio fidelity, it
is desirable to make connections symmetrical: connect both speakers of a given type - for
example, both side surrounds - to similar amplifiers using the same type of connection.)
Note: Both subwoofer outputs are the same (they are not stereo). If you are using two
subwoofers, and you wish to vary the relative output between them, you should do so using
the controls on the individual subwoofers.