Shenzhen ATC-3001 Скачать руководство пользователя страница 36

Страница: 36 / 41

User Manual

ATC-3001 1-port Modbus Gateway

2011

SHENZHEN ATC TECHNOLOGY CO., LTD.

Appendix C: Upgrade System Firmware

After the new version of firmware is released, customers can download it from

http://www.szatc.com

After

one download the firmware, please follow these instructions listed below.

C.1 Upgrade Procedures

When one get a new software version, please follow the sequences below to upgrade ones ATC-3001.

1. Connect a PC (Windows 95/98/NT/2000/XP) and ATC-3001 one wish to upgrade the firmware in the

same TCP/IP network. Use command

ping

or DeviceView program to verify their availability.

2. Prepare the download tool and press any key to edit its configuration file

dapdl.cfg

. dapdl.cfg file

can be found in the product CD.

Edit the

dapdl.cfg

file to fit ones system need, the content of the file looks like as the following.

Be sure to save ones modifications after the change is made.

Remote_IP 10.0.50.100

Load

U5001ap.hex

The first line identifies the IP address of ATC-3001, the second line identifies the firmware (.Hex file) name to
be downloaded.

Execute the utility program

download.bat,

it can be found in the product CD.

Input the user name and password credential, the new firmware will be downloaded.

ATC-3001 will automatically restart each time the firmware is successfully downloaded.

Содержание ATC-3001







































Результаты поиска

Содержание ATC-3001

Отзывы:

Shenzhen ATC-3001, Руководство пользователя, Страница: 36 / 41

Результаты поиска

Содержание ATC-3001

Отзывы: