2017/08/16 Rev. A1
14
8.6. Memory
The Memory 1 and Memory 2 can hold up to 60 readings each.
1)
Enter the memory reading mode.
Press the
【
】
button to enter the memory reading mode.
2)
Read the memory values.
Under the Memory reading mode, press
【
►
】
button to view the latest value to the
earliest value. Press the
【
◄
】
button to view the earliest value to the latest value.
(a)
Enter the memory reading mode, the month, day and data number of the memory
data being viewed will display for 1s,(Fig24) and then turns to (b).
(b)
Hour, minute and data number of the memory data being viewed will display for
1s,(Fig25) and then turns to (c).
(c)
Display the systolic, diastolic, pulse rate and the blood pressure level as show on
Fig26. Press the
【
】
button to return (a).
When reading the memory values, if the result shows the heart mark, it is suggested that
the irregular pulse is detected.
.Refer 7.1 to change user group.
Without any operation for 20s, the unit will automatically turn to standby mode.
Under memory reading mode, press down the
【
】
button for 3s to return the
clock mode, press and hold the
【
】
button exceed 6s to shut off the unit.
3)
Delete the memory values
a)
Enter the memory reading mode.
b)
Press and hold the
【
】
button until the ―—― displays.
c)
The unit will only delete the present memory data set, the other memory data set
will not be affected.
d)
The device is not capable to delete a single data.
Fig24
Fig25
Fig26
