SHENZHEN ENCOM ELECTRIC TECHNOLOGIES CO. EDS780 Series, Руководство пользователя

Страница: 19 / 30

www.enc.net.cn/en Tel/Fax:86-755-26984485/26985120
3 Function parameter schedule graph
16
F5 –terminal correlative function parameter group
Function
code
name Set range unit
Factory
default
modifi
cation
F5.00 Input terminal X1
function selection
0: leave control terminal unused
1: multi-section speed control terminal
2: multi-section speed control terminal
3: multi-section speed control terminal
4: multi-section speed control terminal
5: external forward run jog control
6: external reverse run jog control
7: Acce/Dece time option terminal 1
8: Acce/Dece time option terminal 2
9: Acce/Dece time option terminal 3
10: external device failure input
11: external reset input
12: free stop input
13: external stop-running order
14: stop DC braking input command DB
15: inverter run banned
16: frequency increasing control (UP)
17: frequency degression control (DOWN)
18: Acc/Dec ban command
19: three-line run control
20: closed-loop ineffective
21: PLC ineffective
22: simple PLC pause control
23: PLC stop status reset
24: frequency provision channel option 1
25: frequency provision channel option 2
26: frequency provision channel option 3
27: frequency switched to CCI
28: command switched to terminal
29: run command channel option 1
30: run command channel option 2
31: run command channel option 3
32: traverse jump-in
33: external interruption input
34: interior counter reset end
35: interior counter triggering end
36: interior timer reset end
37: interior timer triggering end
38: reserved
1 0
×
F5.01
Input terminal X2
function selection Same as above
×
F5.02
Input terminal X3
function selection Same as above
×
F5.03 reserved
F5.04 reserved
F5.05 reserved
F5.06 reserved