Page 11
05_GP-BA-XXXXXXA-015XXX12_E0
COVER RAILS
11105
CORRECT
Webbing and Ratchets Securing Cover
FRONT
REAR
Fig. 12
Middle Rib Cover Rail Clamps
12. INSTALLING COVER AND COVER RAILS
A.
Make sure cover is centered on frame. There should be an equal amount of overhang at all four corners.
B.
Insert the “S”- Hook on ratchet into hole on the leg bend. Insert the webbing into the spindle of the ratchet
and pull tight. Wind the ratchet so that the webbing overlaps itself.
C.
Slide cover rails (#11105) through fabric pockets at each leg and reattach with clamps to each leg. Repeat
this on other side. Push down on cover rails to tighten cover, before tightening bolts completely.
D.
Check and tighten Ratchets and Cover Rails monthly to ensure the cover is tight.
NOTE: The ShelterLogic
®
logo should
be oriented as shown below.
INCORRECT
11130
11105
11106
00690
11130
11105
11105
11107
00690
00690
End Rib Cover Rail Clamps