AFTER SALES SUPPORT
PROLINK ASIA LTD
Phone: 0508 776 546 - Mon-Fri 8:30am – 4.30pm
Page 11
CLEANING and MAINTENANCE
This appliance requires little maintenance. It contains no user-serviceable parts. Any
servicing requiring disassembly other than cleaning must be performed by a qualified
appliance repair technician.
Before Cleaning
When not in use or before cleaning, always disconnect the appliance from the
mains supply.
Never immerse the motor unit in water or any other fluid, not rinse it under the
tap. Use only a moist cloth to clean the motor unit.
Care should be taken when handling the sharp cutting blades, emptying the bowl
and during cleaning.
Care and Cleaning
Whenever possible, rinse parts immediately after processing to make clean-up
easier.
Always handle blades using the blade collar.
CAUTION:
Use extreme care when handling blades. Do not touch the blades with
your fingers. The blades are very sharp and can cause injury if touched.
If necessary, use any small nylon bristle brush (Not included) to remove processed
food from the blade and the blade area.
If some leftover particles dry onto the inside of the cup, fill the cup about
⅔
full
with warm soapy water and attach the Milling Blade Assembly. Place the cup and
Blade assembly onto the Power Base and press the Power Button. Let Blade spin
for about 20-30 seconds to help loosen the stuck ingredients.
After use wash all lids in warm soapy water. Rinse and dry thoroughly.
The motor base may be wiped with a damp cloth or sponge. Dry thoroughly.
Regularly clean the outside of the appliance with a soft damp cloth and dry it with
a dry towel. Do not immerse in water.
Processing blades, processing cups and lids are all top-rack dishwasher safe.
NOTICE:
Never use rough scouring pads or abrasive cleansers on any plastic or metal
parts as the surface may be damaged.
NOTICE:
After dishwashing, always check to make sure the gasket seal in the base of
the blade collar is properly in place, as the heat from some dishwashers may cause
them to become loose.
Store in a Safe Place
When not in use store your appliance and all its accessories and instruction manual in
a safe and dry place.
