Shaun White D6 SPORTS, Руководство пользователя

Страница: 34 / 75

6.) Check for bearing flop by placing the handlebars in the normal riding position, then
quickly rotate the handlebars back and forth. Perform the following steps to eliminate
bearing flop.
NOTE: the bearing should never be allowed to rest on the lower plate or lower
adjusting cables.
a.) screw the lower cable adjusting barrels out of (or into) the lower plate until all
bearing is eliminated.
b.) tighten the locknut of the right side adjusting barrel.
c.) rotate the handlebars 180-degrees and recheck for bearing flop.
If there is any bearing flop, use the “loose” adjusting barrels on the upper and lower
cables to remove it.
d.) repeat steps (6a) and (6c) until the handlebars can be rotated 360-degrees without
d.) repeat steps (6a) and (6c) until the handlebars can be rotated 360-degrees without
any bearing flop.
7.) Finish adjusting the rear brakes.
33