Shaun White D6 SPORTS, Руководство пользователя

Страница: 68 / 75

REMOVING AND INSTALLING BOLT ON WHEELS
A.) Removing a Bolt-On Front Wheel
1.) Open up the brake shoes.
2.) Loosen the axle nuts on the wheel.
3.) Unfasten the safety retention washers/hooks.
4.) Lift the front end of the bike a few inches off the ground and tap downward on the tire.
B.) Installing a Bolt-On Front Wheel
1.) With the fork facing forward, insert the wheel between the fork legs so that the axle sits
firmly inside of the dropouts/axle slots on the fork legs.
The axle nuts and axle washers should both be on the outside of the dropout. If there is a
secondary safety/retention system on the wheel, engage it at this time.
secondary safety/retention system on the wheel, engage it at this time.
2.) While pushing the wheel firmly up into the fork dropouts, and at the same time
centering the wheel inside of the fork legs, tighten the axle nuts as tight as you can.
3.) Lift the front wheel off the ground and spin it to make sure that it is centered and clears
the brakes on bikes
with front brakes.
67