SharpEye 20/20MPI, Руководство пользователя и по обслуживанию

Страница: 39 / 64

TM 20/20MPI, Rev (5) April 2017
Detector and Tilt Mount Installation 39
6.4 Detector and Tilt Mount Installation
Refer to Figure 4 and Figure 5 .
1
Unpack the detector. The package includes:
 Detector Assembly P/N 768001 - 20/20MPI-R or 20/20MPI-M
 Tilt Mount P/N 768004 including screw M4 X 12″ for installation of
the detector
 Protective Cover P/N 768005 (optional use where needed)
 3mm Hex Key
2
Place the tilt mount (Item 2) in its designated location and secure it with
3 fasteners through 3 holes 5.4mm in diameter (Figure 4).
Note : Skip this step if the tilt mount is already installed. Also, detector
removal for maintenance purpose does not require tilt mount removal.
3
Place the detector, with its gland pointing down, on the holding plate of
the tilt mount (Item 3). Secure the detector by 1 holding screw
M4 x 12” to the tilt mount. Use 3mm Hex Key for M4 screw (see Item 4
on Figure 5).
4
Release the locking screws (Items 5 and 6 in Figure 5) in such a way
that allows rotating the detector. Point the detector towards the
protected area and make certain that the view of the area is
unobstructed. Secure the detector in that position by tightening the
locking screws (Items 5 and 6) on the tilt mount. (Make sure the
detector is in the right position.)
The detector is now correctly located, aligned, and ready to be connected to
the system.
www.acornfiresecurity.com
www.acornfiresecurity.com