Sharper Image JumpSmart 206454, Руководство пользователя

Страница: 9 / 28

5
© Limitless Innovations, Inc.
General Safety Information (cont.)
⚠
Always wear protective gear such as glasses, gloves, and clothing when working with battery.
⚠
In the unlikely event a battery leak occurs, avoid contact with skin or eyes. Rinse immediately with water and
seek medical attention.
⚠
Caution: The lithium-polymer rechargeable battery used in the JumpSmart device may present a risk of
fire or chemical burn if mistreated or misused. Do
NOT
disassemble, expose to heat above 140°F (60°C) or
incinerate.
⚠
When used correctly, Lithium-Polymer rechargeable batteries provide a safe and dependable source of
portable power. However, if there are misused or abused, this may result in leakage, burns, fire or explosion,
causing personal injury or damage to other devices.
JUMP START SAFETY
⚠
Do
NOT
clamp the Smart Cable clips at the same time and always make sure to clamp the red positive clamp
to the positive terminal of the vehicle battery and the black negative clamp to the negative terminal of the
vehicle battery.
⚠
The JumpSmart should NOT be used to jump start unregistered vehicles.
⚠
Make sure the Smart Cable is fully engaged into the jump starter port before connecting the clamps of the
Smart Cable to the vehicle battery terminals.
⚠
Do NOT lean directly over the battery while making jumper connections.
⚠
Always check all components are connected correctly before attempting to jump start a vehicle.
⚠
Never allow the positive and negative ends of the Smart Cable to touch each other.
⚠
The JumpSmart will allow 3 consecutive jump start attempts. You must allow up to 60 seconds between each
attempt. If your vehicle does not start after three attempts, we recommend you consult a certified mechanic.
⚠
While jump starting your vehicle, you cannot charge your electronic devices using the USB port.
FLASHLIGHT SAFETY
⚠
Do
NOT
look directly into the LED Flashlight of the JumpSmart product.
⚠
Always check all components are connected correctly before attempting to jump start a vehicle.