- 2 -
Base Unit
1. LED Charging Light
2. LED Power Light
3. Charging dock
4. Attenuation select switch
5. RCA Audio In jacks
6. Power On/Off switch
7. DC power conection
• Plug the AC adapter into the DC power
connection at the rear of the Base Unit. Plug the
other end into an AC outlet. Now you are ready to
connect the Base Unit to the TV.
NOTE: This device must be used with the AC
adapter supplied in the package. If your AC
adapter is lost or damaged, please contact
Sharper Image Customer Service. Do not use any
other AC adapters or power cords.
Headphones
8. Charging contacts
9. Battery Compartment (inside
right ear pad)
10. Volume controls
11. Power/Signal LED indicator
12. Power On/Off button
13. Direct line-in jack (bottom of
left ear pad)
Accessories
14. RCA-to-3.5mm cable
15. 3.5mm direct line-in cable
16. 3.5mm-to-RCA adapter
(short “Y-shaped”cable)
17. AC adapter
18. NiMH AAA size batteries for
Headphones (2 pcs.)
IDENTIFICATION OF PARTS
INSTALLING THE BASE UNIT
