Sharp XV-Z90E, Руководство по обслуживанию

Страница: 2 / 122

2
XV-Z90E
XV-Z91E
Specifications
This SHARP projector uses a DMD chip. This very sophisticated chip contains 480,000 pixels. As with any high technology electronicequipment
such as large screen TVs, video systems and videocameras, there are certain acceptable tolerances that the equipment must conform to.
Product type Theater Projector
Model XV-Z90E, XV-Z91E
Video system PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43/DTV 480i/480P/720P/1080i
Display method DLP chip, RGB optical shutter method
DLP panel Panel size: 0.55” (140mm)
Display method: Single Panel Digital Micromirror Device (DMD™) by Texas Instruments
Drive method: Digital Light Processing (DLP™)
No. of dots: 480,000 dots (800 [H] x 600 [V])
Lens 1–1.2 x zoom lens, F1.75-2.04, f=28–33.5mm (XV-Z90E), F2-2.4, f=16.9–20.2mm (XV-Z91E),
Projection lamp DC150 W SHP lamp
Video input signal RCA Connector: VIDEO (INPUT 4), composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
S-video input signal 4-pin Mini DIN connector (INPUT 3)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
Component input signal RCA Connector
(INPUT 1) Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
P
B
: 0.7 Vp-p, 75
Ω
terminated
P
R
: 0.7 Vp-p, 75
Ω
terminated
Component input signal 15-pin D-Sub connector
(INPUT 2) Analog 0.7 Vp-p 75
Ω
Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
P
B
: 0.7 Vp-p, 75
Ω
terminated
P
R
: 0.7 Vp-p, 75
Ω
terminated
Component RGB input signal 15-pin D-Sub connector
(INPUT 2) RGB separate/sync on green type analog input: 0–0.7 Vp-p, positive, 75
Ω
terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative)
VERTICAL SYNC. SIGNAL: Same as above
Horizontal resolution 520 TV lines (NTSC 3.58 input)
RGB input signal 15-PIN MINI D-SUB CONNECTOR (INPUT 2):
RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,75
Ω
terminated
HORIZONTAL SYNC. SIGNAL: TTL level (positive/negative) or composite sync (Apple only)
VERTICAL SYNC. SIGNAL: Same as above
Pixel clock 12–110 MHz
Vertical frequency 43–75 Hz
Horizontal frequency 15–70 kHz
Computer control signal 9-pin D-sub connector (RS-232C Port)
Rated voltage AC 100–240 V
Input current 2.1 A
Rated frequency 50/60 Hz
Power consumption 200 W
Heat dissipation 750 BTU/hour
Operating temperature +5°C to +35°C
Storage temperature – 20°C to +60°C
Cabinet Plastic
I/R carrier frequency 38 kHz
Dimensions (approx.) 368(W) x 153.8(H) x 327(D) mm (including swivel stand)
368(W) x 118(H) x 327(D) mm (main body only)
Weight (approx.) 4.3 kg (including swivel stand)
3.8 kg (main body only)
Supplied accessories Remote control, Two AA size batteries, Power cord, Computer RGB cable, 21 pin RCAconversion adaptor,
Video cable, Terminal cover, Screws for terminal cover, Lens cap (attached on the body), Lens cap strap,
Operation manual
Replacement parts Lamp unit (Lamp/cage module) (BQC-XVZ90+++1), Remote control (RRMCGA099WJSA), AA size batter-
ies, Power cord for Europe except U.K. (QACCV4002CEZZ), Power cord for U.K., Hong Kong and Singapore
(QACCBA012WJPZ), Power cord for Australia and New Zealand (QACCL3022CEZZ), Computer RGB
cable (QCNW-5050CEZZ), 21 pin RCA conversion adaptor (QSOCZ0361CEZZ), Video cable
(QCNWGA001WJZZ), Terminal cover (GCOVAA116WJKA), Screws for terminal cover (XBBSN40P10000),
Lens cap (CCAPHA004WJ01), Lens cap strap (UBNDT0013CEZZ), Operation manuals; for European 7
languages (TINS-A326WJZZ) / for Chinese, Korean and Arabic (TINSA327WJZZ)
Specifications are subject to change without notice.