Sharp XV-Z90 Скачать руководство пользователя страница 15

Страница: 15 / 62

-12

Setup & Connections

Power Supply

Connecting the Power Cord

Plug the supplied power cord into the AC socket on the back of the projector.

Connections

Power cord

CAUTION

• Make sure the power cord is firmly connected into the AC socket.

• The projector will enter the standby mode as you re-plug it into the AC socket, when unplugging the power cord after turning the power

off by pressing the

POWER

button. However, if the projector was turned off by disconnecting the power cord or by a power failure, the

projector will automatically turn on when plugging the power cord again.

Connect one end of the S-video cable (commercially
available) to the

INPUT 3 S-VIDEO

terminal, or one end

of the video cable to the

INPUT 4 VIDEO

terminal on

the projector.

Connect the other end of the S-video cable or the video
cable to the S-video output or Video output terminal of
the video source.

The S-video input terminal uses a video signal system where
the picture is separated into a colour and luminance signal
to realise a higher-quality image.

• For higher quality video, you may use the S-video input terminal on the

projector. An S-video cable is commercially available.

• If your video equipment does not have an S-video output terminal, use

the composite video output terminal.

Connecting to Video Equipment

Connecting a video source (VCR, laser disc player, DVD player or DTV decoder) using the INPUT 3
S-VIDEO and INPUT 4 VIDEO terminals

You can connect your projector to a VCR, laser disc player, DVD player, DTV* decoder and other video equipment.

* DTV is the umbrella term used to describe the new digital television system in the United States.

CAUTION

• Make sure to turn both the projector and the video equipment off, before connecting.

• As this projector is not equipped with audio input terminals, commercially available audio equipment or your own equipment (such as

speakers or amplifiers) should be used.

Содержание XV-Z90































































Результаты поиска

Содержание XV-Z90

Отзывы:

Похожие инструкции для XV-Z90

Бренды по названию

Популярные бренды

Sharp XV-Z90, Руководство по эксплуатации

Результаты поиска

Содержание XV-Z90

Отзывы:

Похожие инструкции для XV-Z90

Бренды по названию

Популярные бренды