-10
Numbers in
refer to the main pages in this operation manual where the topic is explained.
Remote Control
25
34
34
34
34
27
44
29
29
26
11
29
29
29
41
30
27
Connecting the Remote Control to the Projector
When the remote control cannot be used due to the range or positioning of the projector, connect a ø3.5 mm
minijack cable (commercially available) from the WIRED R/C JACK on the top of the remote control to the WIRED
REMOTE control input terminal on the rear of the projector.
Part Names and Functions (Continued)
Remote control signal
transmitters
STANDBY button
For putting the projector into the
standby mode.
ENTER button
For setting items selected or
adjusted on the menu.
RETURN button
For undoing an operation.
AUTO SYNC button
For automatically adjusting images
when connected to a computer.
RESIZE button
For switching the screen size
(SIDE BAR, SMART STRETCH,
etc.).
RGB/COMP. button
For switching to the respective
input signal type.
IRIS button
For switching “HIGH
BRIGHTNESS MODE”, “MEDIUM
MODE” and “HIGH CONTRAST
MODE”.
INPUT button
For displaying the Input list.
WIRED R/C JACK
For controlling the projector by
connecting the remote control to
the projector.
ON button
For turning the power on.
MENU button
For displaying adjustment and
setting screens.
Adjustment buttons
(
"
,
'
,
\
,
|
)
For selecting menu items.
Input Mode Select buttons
For switching to the respective
input modes.
PICTURE MODE button
For selecting the appropriate
picture to best match the projected
image.
CONTRAST button
For displaying the contrast
adjustment screen.
FREEZE button
For freezing images.
BRIGHT button
For displaying the brightness
adjustment screen.
LIGHT button
For lighting all buttons on the
remote control.
To WIRED REMOTE control input terminal
To WIRED R/C JACK
ø3.5 mm minijack cable
(commercially available)
Remote control
XVZ21000̲E̲Ousyu̲P06-11.indd 10
XVZ21000̲E̲Ousyu̲P06-11.indd 10
2006/07/31 19:53:16
2006/07/31 19:53:16
