03/8/20
XL-MP45H(H)E2.fm
E-15
ENGLISH
XL-MP45H
TINSZ0227SJZZ
Radio
Listening to the radio
To receive an FM stereo transmission:
Press the FUNCTION [TUNER (BAND)] button to display the "ST"
indicator.
!
" " will appear when an FM broadcast is in stereo.
!
If the FM reception is weak, press the FUNCTION [TUNER
(BAND)] button to extinguish the "ST" indicator. The reception
changes to monaural, and the sound becomes clearer.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the FUNCTION button until "FM" or "AM" appears on
the display.
When operating with the remote control, press the TUNER
(BAND) button to select "FM" or "AM".
3
Press the TUNING ( or ) button to tune in to the desired
station.
Manual tuning:
Press the TUNING button as many times as required to tune in
to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec-
onds, scanning will start automatically and the tuner will stop at
the first receivable broadcast station.
Notes:
!
When radio interference occurs, auto scan tuning may stop
automatically at that point.
!
Auto scan tuning will skip weak signal stations.
!
To stop the auto tuning, press the TUNING button again.
!
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator
will light. Finally, the station name will appear.
!
Full auto tuning can be achieved for RDS stations "ASPM",
see page 23.
FM stereo mode indicator
FM stereo receiving indicator
