03/8/20
XL-MP45H(H)E3.fm
E-27
ENGLISH
XL-MP45H
TINSZ0227SJZZ
Advanc
e
d Featu
res
Timer and sleep operation (continued)
!
To use timer and sleep operation together
Example: To fall asleep and wake up to the same radio station
You can play back the same source only (the function cannot be
switched).
Caution:
When using the cassette deck, be sure the tape length is long
enough to perform both functions. If you want to sleep and wake up
listening to a tape, and the length of the tape is shorter than the
sleep timer setting, timer playback will not be possible.
Enhancing your system
The connection lead is not included. Purchase a commercially avail-
able lead as shown below.
!
Listening to the playback sounds from VCR,
DVD, etc.
Note:
To prevent noise interference, place the unit away from the televi-
sion.
!
To record on a tape
1
Set the sleep time (steps 1 - 3, page 26).
2
Whilst the sleep timer is set, set the desired playback time
(steps 4 - 6, pages 25 - 26).
Sleep timer setting
Timer playback setting
Sleep operation will
automatically stop.
Timer playback
start time
5 minutes - 3 hours
1
Use a connection lead to connect the VCR, DVD, etc. to the VID-
EO/AUX IN sockets.
When using video equipment, connect the audio output to this
unit and the video output to a television.
2
Press the ON/STAND-BY button to turn the power on.
3
Press the FUNCTION button until "AUX" appears on the display.
When operating with the remote control, press the VIDEO/AUX
button.
4
Play the connected equipment.
1
Load a cassette into the cassette compartment with the side to
be recorded on facing you.
2
Press the VIDEO/AUX button.
3
Press the
button.
4
Press the
( ) button.
5
Play the VCR, DVD, etc.
VCR, DVD, etc.
White
Red
To the line output sockets
White
Red
RCA lead
(not supplied)
