background image

 

XL-MP15H AUS 01-16.fm

 

7

 

2009June11

 

Setting the clock

 

In this example, the clock is set for the 24-hour (00:00) display.

 

To confirm the time display:

 

Press the CLOCK/TIMER button. The time display will appear for
about 5 seconds.

 

To readjust the clock after a power failure or unplugging the
unit or after unit is reset:

 

Perform “Setting the clock” from beginning.

 

Note:

 

To reset the clock if the power fails or is unplugged, the unit must be
in the STAND-BY mode.

 

Listening to a CD or MP3/WMA disc

 

This system can play back a standard CD, CD-R/RW in the CD
format and CD-R/RW with MP3 or WMA files, but cannot record on
them. Some audio CD-R and CD-RW discs may not be playable due
to the state of the disc or the device that was used for recording.

 

MP3:
MP3 is a form of compression. It is an acronym which stands for
MPEG Audio Layer 3. 
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.

 

 

This system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.

 

 

During VBR file playback, time counter in the display may differ
from its actual playback time.

 

 

Bitrate which is supported by MP3 is 32 ~ 320 kbps.

 

WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.

 

 

Bitrate which is supported by WMA is 64 ~ 160 kbps.

 

1

 

In STAND-BY condition.

 

2

 

Press the CLOCK/TIMER button for more than 2 seconds.

 

3

 

Within 10 seconds, press the PRESET (

 or 

) button to set

hour.

 

4

 

Press the CLOCK/TIMER button again.

 

5

 

Within 10 seconds, press the PRESET (

 or 

) button to set

minute.

 

6

 

Press the CLOCK/TIMER button again.

TIMER

TIMER

CLOCK

CLOCK

STAND-BY

STAND-BY

ON

ON

PRESET

PRESET

MICRO COMPONENT SYSTEM

MICRO COMPONENT SYSTEM

XL-MP15

XL-MP15

PHONES

PHONES

ON/ STAND-BY

ON/ STAND-BY

REMOTE 

REMOTE 

SENSOR

SENSOR

ON/ STAND-BY

ON/ STAND-BY

AUDIO IN

AUDIO IN

PRESET

PRESET

PRESET

PRESET

Содержание XL-MP15H





















Отзывы: