background image

 

8

7

6

5

4

3

2

1

 

XL-MP15H AUS 01-16.fm

 

2

 

2009June11

 

Precautions

 

 

Please ensure that the equipment is positioned in a well-
ventilated area and ensure that there is at least 10 cm (4") of free
space along the sides, top and back of the equipment.

 

 

Do not place anything on top of the unit.

 

 

Do not expose the unit to moisture, to temperatures higher than
60˚C (140˚F) or to extremely low temperatures.

 

 

If your system does not work properly, disconnect the AC power
lead from the wall socket. Plug the AC power lead back in, and
then turn on your system.

 

 

No naked flame sources, such as lighted candles, should be
placed on the apparatus.

 

 

Attention should be drawn to the environmental aspects of
battery disposal.

 

 

This unit should only be used within the range of 5˚C - 35˚C
(41˚F - 95˚F).

 

 

The apparatus is designed for use in moderate climates.

 

Warning:

 

The voltage used must be the same as that specified on this unit.
Using this product with a higher voltage other than that which is
specified is dangerous and may result in a fire or other type of
accident causing damage. SHARP will not be held responsible for
any damage resulting from use of this unit with a voltage other than
that which is specified.

The sound level at a given volume setting depends on speaker
efficiency, location, and various other factors. It is advisable to avoid
exposure to high volume levels. Do not turn the volume on to full at
switch on. Listen to music at moderate levels. Excessive sound
pressure from earphones and headphones can cause hearing loss.

 

Controls and indicators

 

Reference page

1. Disc Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8
2. ON/STAND-BY Button  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
3. Function Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
4. Stand-by Indicator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
5. Disc Track Down or Fast Reverse, Tuner Preset Down, 

Time Down Button . . . . . . . . . . . . . . . . . . . . . . . .  7, 8, 12, 13

6. Disc Track Up or Fast Forward, Tuner Preset Up, 

Time Up Button. . . . . . . . . . . . . . . . . . . . . . . . . . .  7, 8, 12, 13

7. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  6
8. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  5
9. Tuning Up/Folder Up Button . . . . . . . . . . . . . . . . . . . .  10, 12

10. Tuning Down/Folder Down Button . . . . . . . . . . . . . . .  10, 12
11. Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8, 10
12. Play/Pause Button  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  8, 11
13. Audio In Socket  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14
14. Headphone Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  14

 

 

General

 

 

Use the unit on a firm, level 
surface free from vibration.

 

 

Keep the unit away from direct 
sunlight, strong magnetic fields, 
excessive dust, humidity and 
electronic/electrical equipment 
(home computers, facsimiles, 
etc.) which generate electrical 
noise.

 

 

In case of an electrical storm, 
unplug the unit for safety.

 

 

Hold the AC power plug by the head 
when removing it from the wall socket, 
as pulling the lead can damage internal 
wires.

 

 

The AC power plug is used as a 
disconnect device and shall always 
remain readily operable.

MICRO COMPONENT SYSTEM

XL-MP15

PHONES

ON/ STAND-BY

REMOTE 

SENSOR

PRESET

FUNCTION

TUNING/FOLDER

AUDIO IN

10 cm (4")

10 cm (4")

10 cm (4")

10 cm 
(4")

MICRO COMPONENT S

YSTEM

XL-MP15

PRESET

TUNING/FOLDER

TUNING/FOLDER

MICRO COMPONENT SYSTEM

XL-MP15

PRESET

TUNING/FOLDER

TUNING/FOLDER

 

 

Do not remove the outer 
cover, as this may result in 
electric shock. Refer internal 
service to your local SHARP 
service facility.

 

 

The ventilation should not be 
impeded by covering the 
ventilation openings with items, 
such as newspapers, 
tablecloths, curtains, etc.

 

 

Volume control

MICRO COMPONENT SYSTEM

XL-MP15

PRESET

TUNING/FOLDER

TUNING/FOLDER

MICRO COMPONENT SYSTEM

MICRO COMPONENT SYSTEM

XL-MP15

XL-MP15

PHONES

PHONES

ON/ STAND-BY

ON/ STAND-BY

REMOTE

REMOTE

SENSOR

SENSOR

PRESET

PRESET

AUDIO

AUDIO IN

IN

2

5

3

4

6

7

1

3

11

10

9

8

14

12

1

 

 

Front panel

Содержание XL-MP15H





















Отзывы: