02/7/23
XL-HP500H(H)E2.fm
E-19
ENGLISH
XL-HP500H
Tape
Recordi
n
g
Recording to a cassette tape (continued)
Recording from several CDs continuously:
To perform programmed recording:
To stop recording:
Press
the
(TAPE )
button.
The CD and tape will stop.
Auto restart function:
If the recording side is switched from side A to B during recording,
the system will record the interrupted track on side B from its begin-
ning. The recording will be made without cutting the beginning of the
track on side B.
!
Recording from the radio
To interrupt recording:
Press the
button.
To resume recording, press the same recording button you pressed
in step 5. Other buttons do not allow resuming.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
!
Erasing recorded tapes
1
Press the TAPE button.
2
Follow steps 2 - 5 in "Recording from the radio".
1 Perform steps 1 - 5 in "Recording from a CD (CDs)" on page 18.
2 Press the / ( ) button to record on side A, or the button for
side B.
1 Programme discs and tracks. (See page 14.)
2 Press the
button.
3 Press the / ( ) button to record on side A, or the button for
side B.
Erase-prevention tab of cassette tapes:
"
When recording on a cassette tape,
make sure that the erase-prevention
tabs are not removed. Cassettes have
removable tabs that prevent accidental
recording or erasing.
"
To protect the recorded sound, remove
the tab after recording. Cover the tab
hole with adhesive tape to record on the
tape without the tab.
Side A
Tab for
side B
Tab for
side A
1
Tune in to the desired station. (See page 15.)
2
Load a cassette into the cassette compartment with side A
facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the
button to choose one side or both sides.
...
To record on both sides.
...
To record on only one
side.
4
Press the
button.
Recording will be paused.
5
Press the / ( ) button to record on side A, or the but-
ton for side B.
To record on both sides, begin on side A. (If recording is started
from side B, the tape will not switch over to side A.)
