Sharp XG-V10WE, Руководство по эксплуатации

Страница: 89 / 92

86
Appendix
Specifications
Product type
Model
Video system
Display method
LCD panel
Projection lamp
Contrast ratio
Video input signal
S-video input signal
Component input signal
Horizontal resolution
RGB input signal
Pixel clock
Vertical frequency
Horizontal frequency
Computer control signal
Speaker system
Rated voltage
Input current
Rated frequency
Power consumption
Power dissipation
Operating temperature
Storage temperature
Cabinet
I/R carrier frequency
Laser pointer of remote control
Dimensions (approx.)
Weight (approx.)
Supplied accessories
Replacement parts
LCD Projector
XG-V10WE
PAL/PAL 60/PAL-M/PAL-N/SECAM/NTSC 3.58/NTSC 4.43
DTV 480i/480P/720P/1080i
LCD panel
3, RGB optical shutter method
Panel size: 46 mm (1.8 ) (28.7 [H] 35.8 [W] mm)
Display method: Translucent TN liquid crystal panel
Drive method: TFT (Thin Film Transistor) Active Matrix panel
No. of dots: 1,310,720 dots (1,280 [H]
1,024 [V])
200 W UHP lamp 2
400:1
BNC Connector: VIDEO (INPUT 4, 5), composite video, 1.0 Vp-p, sync negative, 75
Ω
terminated
RCA Connector: AUDIO (INPUT 4, 5), 0.5 Vrms more than 22 k
Ω
(stereo)
4-pin Mini DIN connector (INPUT 4, 5)
Y (luminance signal): 1.0 Vp-p, sync negative, 75
Ω
terminated
C (chrominance signal): Burst 0.286 Vp-p, 75
Ω
terminated
BNC Connector (INPUT 2, 4, 5)
Y: 1.0 Vp-p, sync negative, 75
Ω
terminated
P
B
: 0.7 Vp-p, 75
Ω
terminated
P
R
: 0.7 Vp-p, 75
Ω
terminated
620 TV lines (video input), 720 TV lines (DTV 720P input, Dot by Dot)
15-
PIN MINI
D-
SUB CONNECTOR
(INPUT 1), 5 BNC
CONNECTOR
(INPUT 2):
RGB separate/composite sync/sync on green type analog input: 0–0.7 Vp-p, positive,
75
Ω
terminated
DVI
CONNECTOR
(29-
PIN
) (INPUT 3), RGB (DIGITAL), 250–1,000 mV, 50
Ω
H
ORIZONTAL SYNC
.
SIGNAL
: TTL level (positive/negative) or composite sync (Apple only)
V
ERTICAL SYNC
.
SIGNAL
: Same as above
12–230 MHz
43–200 Hz
15–126 kHz
9-pin D-sub connector (RS-232C Input Port/Output Port)
5
8 cm (1 31 ⁄
32
3 5 ⁄
32
) oval 2, 3 W 3 W (stereo)
AC 110–120/220–240 V
6.2 A/3.1 A
50/60 Hz
575 W
< 2,100 BTU/hour
5°C to 40°C
20°C to 60°C
Plastic
38 kHz
Wave length: 650 nm / Max. output: 1 mW / Class
II Laser Product
444.2 196.2 621.3 mm (W H D) (main body only)
530.1 221.9 643.2 mm (W H D) (including standard lens, terminal cover,
adjustment feet and projecting parts)
18.9 kg (main body only)
Remote control, Two AA size batteries, Power cord (1.8 m), RGB cable (3 m), PS/2 mouse
control cable (1 m), USB mouse control cable (1 m), Remote mouse receiver, Extra air
filter, Terminal cover, CD-ROM, LCD projector operation manual, LCD projector quick
references, Sharp Advanced Presentation Software operation manual
Lamp unit (Lamp/cage module) (BQC-XGV10WU/1), Remote control (RRMCG1565CESA),
AA size batteries, Power cord, RGB cable (QCNW-5304CEZZ), PS/2 mouse control cable
(QCNW-5113CEZZ), USB mouse control cable (QCNW-5680CEZZ), Remote mouse
receiver (RUNTK0673CEZZ), Air filter (PFILD0110CEZZ), Terminal cover
(CCOVA1789CE01), CD-ROM (UDSKA0027CEN1), LCD projector operation manual (TINS-
6975CEZZ), LCD projector quick references (TINS-6981CEZZ, TINS-6982CEZZ, TINS-
6983CEZZ), Sharp Advanced Presentation Software operation manual (TINS-6993CEZZ)
This SHARP projector uses LCD (Liquid Crystal Display) panels. These
very sophisticated panels contain 1,310,720 pixels (
RGB) TFTs
(Thin Film Transistors). As with any high technology electronic
equipment such as large screen TVs, video systems and video
cameras, there are certain acceptable tolerances that the equipment
must conform to.
This unit has some inactive TFTs within acceptable tolerances which
may result in illuminated or inactive dots on the picture screen. This
will not affect the picture quality or the life expectancy of the unit.
Specifications are subject to change without notice.