20
Operation
Reversed Image Setup
Rear projection
• Place a translucent screen between the projector and
the audience.
• Use the projector’s menu system to reverse the
projected image. (See page 42 for use of this
function.)
Projection using a mirror
• Place a mirror (normal flat type) in front of the lens.
• Use the projector’s menu system to reverse the
projected image. (See page 42 for use of this
function.)
• The image reflected from the mirror is projected onto
the screen.
2. Setting up the Screen
Continued
• Optimal image quality is produced with the projector positioned perpendicular to the screen with all feet flat and level.
CAUTION
• When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of
the audience.
Ceiling-mount Setup
• It is recommended that you use the optional Sharp
ceiling-mount bracket for this installation.
• Before mounting the projector, contact your nearest
Authorised Sharp Industrial LCD Products Dealer or
Service Centre to obtain the recommended ceiling-
mount bracket (sold separately). (AN-NV6T ceiling-
mount bracket, AN-TK201/AN-TK202 extension tube
for AN-NV6T.)
• When the projector is in the inverted position, use the
upper edge of the screen as the base line.
• Use the projector’s menu system to select the
appropriate projection mode. (See page 42 for use
of this function.)
