15
Setup & Connections
Connecting the Projector
Connecting the Projector to a Computer
You can connect your projector to a computer for projection of full colour computer images. See the next page for
details on the connections.
CAUTION
• Before connecting, be sure to turn both the projector and the computer off. After making all connections, turn the projector
on first. The computer should always be turned on last.
• Please read the computer’s operation manual carefully.
• Refer to page 43 “Input Signals (Recommended Timing)” for a list of computer signals compatible with the projector. Use with computer
signals other than those listed may cause some of the functions not to work.
Mouse control serial cable
(supplied)
Mouse control cable for
Mac (supplied)
Mouse control cable for IBM PS/2 (supplied)
Computer cable (supplied)
RS-232C cable (cross type, sold separately)
Computer audio cable (3.5 mm stereo minijack cable, supplied)
Use this terminal to con-
nect the supplied mouse
control cable to the remote
mouse receiver.
Macintosh adaptor
(supplied)
Rear terminals
• The arrows (
→
,
↔
) indicate the direction of the signals.
• When connecting to a Macintosh computer, use the supplied Macintosh adaptor.
Remote mouse receiver (supplied)
Computer