E-9
Setting Up the Projector
Using the Focus, Zoom and Lens Shift
•
Lens Shift, Zoom, Focus and Reversed/Inverted Image mode functions broaden your options
for projector placement.
•
See pages 10, 12 and 13 for details on projector setup.
SIDE VIEW
3
F O C U S
S H I F T
S H I F T
Z O O M
↔
←
←
←
ZOOM
SHIFT
3. Press the LENS button.
•
When using the remote control to adjust the picture,
move the MOUSE/ADJUSTMENT sliding switch to the
ADJUSTMENT position. When the LENS button on the
remote control or on the projector is pressed, the LENS
adjustment mode is indicated for about 8 seconds.
•
If the LENS button is pressed while the mode is indi-
cated on the screen, the picture adjustment mode
changes as shown on the left.
•
You can adjust the picture as shown on the left by
pressing the ADJUSTMENT ( ) or ( ) buttons while in
ADJUST mode.
Note:
• Do not attempt to adjust the lens by hand as it may damage
the lens mechanism.
•
Adjust the focus until the picture on the screen is sharp.
•
The focus pattern appears on the screen.
•
The picture can be adjusted to the desired size within
the zoom lens range.
•
The picture can be adjusted within the shift range of the
lens.
MENU
ENTER
LENS
E-ZOOM
MUTE
VOLUME
INPUT
SELECT
MN
LN
E-Z
IN
ADJ.
EN
MENU
ENTER
LENS
E-ZOOM
MUTE
VOLUME
INPUT
SELECT
MN
LN
E-Z
IN
ADJ.
EN
Invert Image
Zoom
Ceiling setting
Lens Shift
Table setting
Zoom
2. Turn on the POWER.
Press the POWER ON/OFF button on the projector or the
POWER ON button on the remote control to turn on the
power.
2
POWER
indicator
ON/OFF
POWER
LAMP
TEMP.
FOCUS
1. Turn on the MAIN POWER.
Turn on the MAIN POWER switch on the side of the
projector.
