Sharp XE-A407 Скачать руководство пользователя

Страница: 100 / 116

SD CARD Mode

You can exchange data through an SD memory card between your register and a PC when managing the

data in your register by using the SHARP’s PC software “Customer Support Tool”.

Customer Support Tool can be downloaded from the Sharp web site.

Please visit the Sharp web site:

http://www.sharpusa.com/registersoftware

You can also save all necessary data in the register to an SD memory card for backup.

To use the SD memory card function, select the “7 SD CARD MODE” in the mode selection window and

perform the following operations.

This instruction manual describes only those operations needed on the register. For details, please refer to

the help section in the “Customer Support Tool”.

■

Inserting and removing an SD memory card

The SD card slot is located on the front side of your register.

Inserting an SD memory card

Insert an SD memory card into the SD card slot with the printed

SD logo facing upwards. Push the card in steady with a finger

until it clicks and release it slowly.

Removing the SD memory card

Push the card in gently with a finger and release it. The card will

come out.

NOTE

• This model supports SD cards only. Use of any other types of

SD cards such as mini SD, micro SD, etc. with an adapter is not supported.

• When inserting or removing the SD memory card, be sure to release it slowly. Otherwise, the card may pop

out and injure your finger.

• Never touch or remove the SD memory card while it is accessed, otherwise the data stored in it may be

damaged.

• Formatting the SD memory card erases all the data in it.
CAUTION: Never turn the power off, while the SD memory card is accessed.

■

SD card formatting

When the SD card is not formatted yet, take the formatting operation.

Procedure

(1) Select “4 FORMATTING” in the SD CARD mode and press the

key, the confirmation window

is displayed.

(2) To perform the format operation, select OK and press the

key.

To cancel the operation, select CANCEL and press the

key.

■

Folder creating

A user folder can be created in the following location:

SHARP/ECRXE4X7/nnnnnnnn (nnnnnnnn: user folder name)

Procedure

(1) Select “3 FOLDER CONTROL” in the SD CARD mode and press the

key.

(2) Select “1 CREATE FOLDER” and press the

key, the folder name entry window is displayed.

(3) Enter the required folder name and press the

key.

To cancel the operation, press the

key.

Содержание XE-A407





















































































































Результаты поиска

Содержание XE-A407

Отзывы:

Похожие инструкции для XE-A407

Бренды по названию

Популярные бренды

Sharp XE-A407, Инструкция по эксплуатации

Результаты поиска

Содержание XE-A407

Отзывы:

Похожие инструкции для XE-A407

Бренды по названию

Популярные бренды