Sharp XE-A407 Скачать руководство пользователя страница 65

Страница: 65 / 116

■

Charge key (Charge1, Charge2)

Procedure

Program each item as follows:

• +TEXT (Use the character entry)

Description for the gross charge. Up to 12 characters can be
entered.

• -TEXT (Use the character entry)

Description for the refund charge. Up to 12 characters can be
entered.

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99

• FOOTER PRINT (Use the selective entry)

This item decides whether or not your register should print a
message at the foot of a receipt when a specified charge key
is used.
YES: Enables footer printing on the receipt.
NO: Disables footer printing on the receipt.

• TEND. (Use the selective entry)

COMPULSORY: Compulsory amount tendered entry.
INHIBITED:

Inhibits amount tendered entry.

Содержание XE-A407





















































































































Результаты поиска

Содержание XE-A407

Отзывы:

Бренды по названию

Популярные бренды

Sharp XE-A407, Инструкция по эксплуатации

Результаты поиска

Содержание XE-A407

Отзывы:

Бренды по названию

Популярные бренды