Sharp WF-1100W MK2, Руководство по эксплуатации

Страница: 6 / 20

E-5
ENGLISH
WF-1100W
2008/November/6
WF-1100W_MK2-EN
MK2
Preparation for Use
System connections (continued)
AC power connection
AC plug adaptor
In areas (or countries) where an AC socket as shown in illustration
2
is used, connect the unit using the AC plug adaptor supplied with
the unit, as illustrated. The AC plug adaptor is not included in areas
where the AC wall socket and AC power plug can be directly
connected (see illustration
1
).
Notes:
If the unit will not be used for a long period of time, remove the AC
power lead from the AC socket.
Connection of the AC power lead to the unit disconnects the
batteries.
Never use a power lead other than the one supplied. Use of a
power lead other than the one supplied may cause an electric
shock or fire.
If a humming noise occurs, turn the power plug upside down
where it is connected to the AC power input socket on the unit.
110-127/220-240 V
50/60 Hz
AC 220V
- 240V AC 110V
- 127V
AC 220V
- 240V AC 110V
- 127V
1
2
To AC INPUT
To the wall socket
VOLTAGE
SELECTOR
VOLTAGE
SELECTOR
Check the setting of the AC voltage selector located on the rear
panel before plugging the unit into a wall socket. If necessary, adjust
the selector to correspond to the AC power voltage used in your
area.
Selector adjustment:
Slide the selector with a screwdriver to the appropriate voltage
number (AC 110 - 127 V or AC 220 - 240 V).