Sharp VC-A136X Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 25

Sharp VC-A136X Скачать руководство пользователя страница 12

Inserting a Video Cassette

Gently

insert the video cassette into the cassette compartment. The VCR turns on automatically. If the

cassette is inserted incorrectly, the loading system will not function. Do not force the cassette
VCR. When the cassette has been properly loaded,

appears on the VCR display.

--.

To remove the cassette, press the EJECT button during stop mode.

Playback

into the

PREPARATION

*Turn on your TV and select the video channel.

Insert a cassette.

PLAY/x

PLAY/x 2

OPERATE

STOP/EJECT

Press the

OPERATE

button to turn on the VCR.

Insert a cassette.
Press the PLAY/X2 button. (The auto tracking control system engages and

flashes on the

VCR display for a few seconds.)

To stop playback, press the STOP button. (If the tape reaches its end, the VCR will automatically

rewind the tape to the beginning, eject the cassette, and turn off the power.)

S H A R P

Video Search (with the remote control)

Use the following procedure to quickly find the section you want, while viewing the picture.

During playback, press the FF button for forward video search, or the REW button for reverse

search.

There are 2 search speeds in each direction. The VCR switches between them each time the

button is pressed.
Press the PLAY/X2 button to resume normal playback.

NOTE:

l

During video search of a tape recorded in the

LP

mode, the upper part of the picture may be skewed to one

side.

Fast Forwarding and Rewinding (with the remote control)

To move through the cassette faster, press

the STOP button and then press the FF or REW button

to fast forward or rewind the cassette. (The picture cannot be viewed in this mode.)
Press the STOP button to stop fast forward or rewind.

NOTE:

l

If you use other than

E-90-E-180

cassettes, fast forward and rewind may take somewhat longer.

11

«
...
10
11
12
13
14
...
»

Содержание VC-A136X


























Отзывы:

Нет отзывов