Messages and Signals
85
9. T
roub
le-
shooting
Messages and Signals
Display messages
Note: If you have turned on the Caller ID function, see page 69 for display
messages related to Caller ID.
ADD PAPER & /
PRESS START KEY
(alternating messages)
Check the printing paper. If the tray is empty, add
paper and then press
. If there is paper in
the tray, make sure it is inserted correctly (take out
the stack, align the edges evenly, and then reinsert it
in the tray) and then press
.
A.M. TRANSFER
The answering machine's transfer function has been
turned on (see page 31).
COVER OPEN
The cover (operation panel) is open. Press down
firmly on both sides of the cover to close it.
CHECK PAPER SIZE
An incorrect size of paper may have been loaded in
the paper tray. Check the size of the loaded paper (if
needed, remove the paper and load A4-size paper).
Press
to clear the message.
DOCUMENT JAMMED
The original document is jammed. See the following
section,
Clearing Paper Jams
. Document jams will
occur if you load more than 10 pages at once or load
documents that are too thick (see page 42).
FAX RX IN MEMORY
A fax has been received in memory because the
imaging film needs replacement, you have run out of
printing paper, or the paper is jammed. The fax will
print out automatically when the problem is fixed.
FILM END
The imaging film may need replacement. Check the
film and replace if necessary.
FUNCTION MODE
has been pressed.
START/MEMORY
START/MEMORY
STOP
all.book Page 85 Thursday, October 21, 2004 9:24 AM