How to Extend Display Pole
The pole can be extended by installing the attached pole to the
standard pole.
COMPONENT LIST:
No.
NAME
USE
Q’ty
,
Pole cabinet
Pole extension
2
Screw (M3
´
4)
Pole connection
4
Screw (M4
´
16)
Securing the UP-P20DP to
the wooden table
4
Screw (M4
´
20)
Securing the UP-P20DP to
the metal table
4
Nut
Securing the UP-P20DP to
the metal table
4
Display cable (S)
This display cable (S)
should be used instead of
the standard cable and
earth wire if the UP-20DP’s
standard pole is removed
to lower the height of the
UP-20DP.
1
Earth wire (S)
1
1) Remove the five screws
.
2) Remove the Base angle
.
3) Remove the PWB unit
from the Base cabinet
.
4) Remove the display cable
from the PWB unit
.
5) Remove the two screws
.
6) Remove the Base cabinet
from the pole cabinet
.
7) Pull the Ratchet
attached to the pole cabinet
out of the
Display unit
by turning it as shown in Figure A.
8) Remove the two screws
.
9) Remove the pole cabinet
from the Ratchet
.
Pattern side(PWB)
Core
1
2
3
4
5
1
6
4
7
7
8
9
10
10
9
