Sharp TU-T2, Руководство по эксплуатации

Страница: 7 / 32

7
Inserting the batteries
Before using the Receiver for the first time, insert the two supplied “AAA” size zinc-carbon batteries. When the batteries
become depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.
Open the battery cover.
1
Insert the two supplied “AAA” size zinc-
2
carbon batteries.
Place batteries with their terminals corresponding to the
•
(
e
) and (
f
) indications in the battery compartment.
Close the battery cover.
3
+
-
+
-
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
Do not mix batteries of different types. Different types of batteries have different characteristics.
•
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old
•
batteries.
Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find any chemical leakage,
•
wipe thoroughly with a cloth.
The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
•
If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
•
When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.
•
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household rubbish.
Deposit any used batteries free of charge into the designated collection containers set up at commercial businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the
front of the Receiver. Objects between the remote control
unit and sensor may prevent proper operation.
Remote control sensor
Cautions regarding the remote control unit
Do not expose the remote control unit to shock. In addition, do not expose
•
the remote control unit to liquids, and do not place in an area with high
humidity.
Do not place the remote control unit under direct sunlight. The heat may
•
cause deformation of the unit.
The remote control unit may not work properly if the remote control sensor of
•
the Receiver is under direct sunlight or strong lighting. In such cases, change
the angle of the lighting or the Receiver, or operate the remote control unit
closer to the remote control sensor.
Preparation
TU-T2_GB.indd 7 TU-T2_GB.indd 7 01/06/2010 16:02:49 01/06/2010 16:02:49