Sharp TL-M5200, Руководство по эксплуатации

Страница: 28 / 76

26
Operating with the Remote Control
Selectable items Description
Cinema 16:9
Cinema 16:9
For 16:9 letterbox pictures. The top and bottom of the image
may be cut off depending on the input signal.
Cinema 14:9
Cinema 14:9
For 14:9 letterbox pictures. The top and bottom of the image
may be cut off depending on the input signal.
Dot by Dot Display an image with the same number of pixels on the
screen (only when receiving 1080i/1080p signal via
component or HDMI terminals).
Computer input
Selectable items Description
Normal
Normal
Keeps the original aspect ratio in a full screen display.
Full
Full
An image fully fills the screen.
Dot by Dot
Dot by Dot
Detects the resolution of the signal and displays an image with
the same number of pixels on the screen.
Displays an image that overlaps the screen when a signal of
greater resolution than the size of the screen is input.
• When using the Resize function to select an image size with a different aspect ratio to a TV program or video image, the
image will look different from its original appearance. Keep this in mind while choosing an image size.
• The use of the Resize or split-screen function to compress or stretch the image for commercial purposes/public displays in a
café, hotel, etc. may be an infringement of copyright protected by law for copyright holders. Please use caution.
• While watching non-widescreen images (4:3), if you use the Resize function to fi ll the screen, parts of the outer edge of the
image will be cut off or distorted. To watch original images as the producers intended, set the Resize mode to “Normal”.
• When “Multi Screen” is set, the Resize mode is fi xed to “Full”.
• When split-screen display is selected, the Resize mode cannot be changed.
• When playing commercial software, parts of the image (like subtitles) may be cropped. In this case select the optimal screen
size using the Resize function of this monitor. With some software, there may be noise or distortion at the edges of the screen.
This is due to the characteristics of the software, and is not a malfunction.
• Depending on the original image size, black bands may remain at the edges of the screen.
Note