Sharp SSC2489GS, Руководство по установке

Страница: 7 / 16

E 7
ELECTRICAL OUTLET
The electrical requirements are a 120 volt 60 Hz, AC only, 15
amp. or more protected electrical supply. It is recommended that
a separate circuit serving only this appliance be provided.
The oven is equipped with a 3-prong grounding plug. It must
be plugged into a wall receptacle that is properly installed and
grounded. Should you only have a 2-prong outlet, have a qualified
electrician install a correct wall receptacle.
* Install the oven in a cabinet with the proper 3-prong outlet or in a
cabinet adjacent to a proper 3-prong outlet if the provided power
supply cord can reach the outlet. Do not use an extension cord.
Note: Always check electrical codes for requirements. If you
have any questions about the grounding or electrical instructions,
consult a qualified electrician or service person.
GROUNDING INSTRUCTIONS
This appliance must be grounded. The oven is equipped with a
3-prong plug which includes a grounding pin. It must be plugged
into a wall receptacle that is properly installed and grounded in
accordance with the National Electrical Code and local codes
and ordinances. In the event of an electrical short circuit,
grounding reduces risk of electric shock by providing an escape
wire for the electric current.
Improper use of the grounding plug can result
in a risk of electric shock. Do not use an extension cord. If the
power supply cord is too short, have a qualified electrician or
serviceperson install an outlet near the appliance.
BEFORE YOU CALL FOR SERVICE
Read the BEFORE YOU CALL and operating instruction sections
in your Operation Manual. It may save you time and expense. The
list includes common occurrences that are not the result of defec-
tive workmanship or materials in this Smart Combi Steam Oven.
Refer to the warranty in your Operation Manual for Sharp’s
toll-free service number and address. Please call or write if you
have inquiries about your Smart Combi Steam Oven product and/
or need to order parts.
MODEL AND SERIAL NUMBER LOCATION
The model number and serial number are printed on the
nameplate. To access the nameplate, open the drip tray door and
remove the drip tray. The nameplate is located to the left of the
reservoir.
Nameplate Location
CARE, CLEANING AND MAINTENANCE
Refer to the Operation Manual for cleaning instructions.