SM-SX100
– 3 –
Specifications for this model are subject to change without
prior notice.
SPECIFICATIONS
120 V, 60 Hz
230 V, 50 Hz
220 - 240 V, 50/60 Hz
230V, 50 Hz
220 V, 50 Hz
110 - 120 V, 50/60 Hz
220 - 240 V, 50/60 Hz
Rated output power:
RMS; 100 W + 100 W (DIN 45 500)
Total harmonic distortion:
0.02 % (1 kHz, 1 W)
Frequency response:
5 Hz-20 kHz (+1dB, -1dB)
5 Hz-100 kHz (+1dB, -3dB)
Dynamic range:
105 dB (5 Hz-20 kHz)
A/D noise shaping:
7th-order
(delta-sigma) modulation
Input terminals:
DIGITAL1; ST link optical
DIGITAL2; BNC coaxial
DIGITAL3; RCA coaxial
DIGITAL4; Square type optical
SACD; RCA analog, 1 BIT digital
LINE 1; RCA analog
(350 mV rms / 50 k ohms)
LINE 2; XLR analog balanced
(350 mV rms / 50 k ohms)
Output terminals:
DIGITAL OUT; Square type optical
LINE OUT; RCA analog
SPEAKERS; 8 ohms/4 ohms selectable
Power source/power consumption:
North America
Europe
Australia,
New Zealand
Singapore
Hong Kong
Other countries
76 W
70 W
70 W
70 W
72 W
70 W
70 W
POWER
CONSUMPTION
Dimensions:
Width; 472 mm (18 - 5/8”)
Height; 89 mm (3 - 1/2”)
Depth; 462 mm (18 - 3/16”)
Weight:
Approx. 18.5 kg (40.8 lbs.)
POWER SOURCE
NAMES OF PARTS
1
2
3
4
1 Power button
Turns the unit on or off.
2 Volume control knob
Controls the sound level.
3 Volume display
Displays the sound level within the range
of “0” - “128”.
4 Input selector buttons
Used to select the equipment source you
want to play back.
When the power is turned on, the unit is
switched to “SACD”.
To cut the output to the speaker with
the power turned on:
Set the sound level at “0” then press and
hold the corresponding input selector but-
ton for 2 seconds or more.
The signal output to the speaker returns
when you reset the sound level at “1” or
higher.
Front Panel
