Sharp SJ-RM320TB, Руководство по обслуживанию

Страница: 48 / 54

SJ-WS320T-S
48
(1) Check the left and right rollers for run on height. (R and F)
(2) Adjust the run on height by using the spacer kit. (R and F)
(3) Check balance between right and left regarding the door opening/closing force, self-closing force and Roller run
on height. If right and left door opening/closing operation are not balanced, proceed to (4) below.
Btm hinge s ass'y
Btm hinge s ass'y
Roller
Door
Door
R door : 2.5
～
3.5 mm
F door : 3
～
4 mm
Difference in run on height between right and left Rollers
should be within 0.5 mm.
(Side view)
Run on height
Acceptable run on height
The run on height may be checked by referring to the figure shown below.
Gradually open the door until it goes to the highest position,
and measure the space between the bottom of the door
and the top of Btm hinge s ass’ y.
Run on height
(Front view)
R
F
Roller spacer
Door cam spacer
(Align the round section
of the corner with the door.)
Door cam
Roller
Door
Door
When run on
height is large.
Place the Door cam spacer.
Up to four Door cam spacers can be used.
Up to four Door cam spacers can be used.
Attach the Roller spacer.
When run on
height is small.