Sharp SJ-GF60A, Руководство по эксплуатации

Страница: 53 / 56

53
Problem
Page
ー
ー
ー
ー
●
●
●
●
●
40
49
ー
28
Fresh case
does not
close properly
●
Is the gripper (drawing on the right)
deformed?
Contact the Sharp Service
Center for parts
replacement. Grippers
(Status after removing fresh case)
Causes What to do
●
It is the failure of heat release fan motor.
(It cannot be seen from outside.)
・
Though cooling operation will be continued, the cooling
performance may deteriorate.
・
Although operation is accepted from the control panel even
when this error is displayed, the error display will return when
it goes back to normal display.
All temperature
control lamps
are flashing
at the same time
41
●
●
●
●
ー
ー
ー
●
●
●
28
45
● A small hole at door inside
Hole required for a insulation material
foaming process (several on every door)
●
Lines looks like crack or blemish on plastic parts
●
The dent at plastic part
Dent made by
shrinkage of
the resin material.
Followings are not defects during production. You can use them normally.
The meeting part of the resin material or
the junction part of the metallic mold
are remained like lines.
(Status after removed fresh scase, etc.)
The shape (crack and dent) of parts is worried about.
Dent
Line
Small hole
Hot food freezing,
Express freezing,
or Express ice making
are not working
Are any of the functions;
Hot food freezing, Express freezing,
or Express ice making in operation?
Cancel or wait for the function
currently in operation to finish.
Those functions cannot work at the
same time.
Is the refrigerator door open?
Is water, oil, or something attached to
the control panel or your finger?
Close the door first to operate the panel.
Wipe it off before operating the panel.
Touch the keys with your bare hand.
Is some sticker or tape attached to the
control panel?
Remove the sticker or tape before
using the panel.
Are you operating the right place in the
control key?
Make sure to press the center of the
control key.
Press the panel a little bit longer.
Are you pressing the panel long enough for it to respond?
The touch control
panel does not
react to any
operation
Are food with strong smells stored
without wrapping or for a long period?
We recommend use of a plastic wrap.
It is impossible to remove all odors even by the deodorizing mode. The vegetable
compartment is not deodorized because the cool air does not enter the compartment directly.
Sometimes, you may smell ozone, which is generated from Plasmacluster.
The concentration of ozone is so small and will not harm human health.
Ozone will also decompose soon, and therefore, it will not fill the compartment.
The odor sources may be attached inside the refrigerator. Wipe the inside with
a wet cloth wrung tightly.
There is odor
in the
compartment
Is the refrigerator tilted or moved? If water remains in the evaporating pan (which
cannot be seen from outside) inside the
refrigerator, it may become spilled on the floor.
The floor
is wet
<Others>
<Control panel>
Are you wearing gloves or a adhesive bandage?
Are you trying to operate the panel with nails
or something pointy?