Sharp SJ-FS79V, Руководство по эксплуатации

Страница: 29 / 36

29
ENGLISH
AUTOMATIC ICE MAKER
How ice cubes are made
Water supply
<Refrigerator compartment>
Water tank
Pump
Pipe
Ice tray
Detection
lever
Ice storage
box
<Freezer compartment>
Detection lever
The volume of ice cubes are
checked periodically by the
detection lever.
Detection
lever
Full volume
Ice cube volume will decrease
when the ice cubes are not
smoothed.
(About half the volume)
● Water is sent from the
water tank to the ice tray.
Ice making
● Ice cubes are made.
(8 pieces at one time)
● The number of ice cubes
per cycle may sometimes
change.
Releasing
●
Ice tray rotates, releasing
the ice and returns to
“Water supply”.
● The ice tray will not rotate
when the ice storage box
is full.
Water tank
(Approx. 1.8 L)
Shovel
Ice storage box
Ice tray
Ice tray is located at the
upper section in the back.
(Unremovable)
Noise-prevention sheet
To turn down the dropping
sound of ice cubes.
Do not throw away this
sheet.
Food area
Store the small
frozen food.
Ice storage area
Stored ice cube volume (Maximum)
Normal size ice : Approx. 232 pcs.
Large size ice : Approx. 112 pcs.
Kinds of ice making mode
There are 5 modes you can choose as shown below.
The size or the clarity of ice cube differs according to the selected mode.
Mode Icon Ice size Clarity of ice
Required time
for each ice making
Ice making OFF
[
—— —— ——
Normal ice
[
Normal Normal Approx .2 hours
Large ice
[
Large Normal Approx .3 and a half hours
Clear ice
(Normal size)
[
Normal High Approx .6 hours
Clear ice
(Large size)
[
Large High Approx .8 hours
NOTE
● 2 types of ice cube are made at the same time.
Cube Multifaceted shape
● More than one mode cannot be selected at one time.
●
The ice making time as shown above is only a rough
indication at the ambient temperature of 30°C, the
temperature adjustment set to Med, Energy saving
turned off, and with no opening or closing of the doors.
Ice making right after changing the mode
●
The fi rst batch of ice cubes made right after changing
the operating mode does not re fl ect the change in size
or clarity. This is because there are still half-made ice
cubes left in the ice tray when switching to the changed
mode. Ice cubes of the 2nd batch or later will re fl ect the
mode change.
Ice making takes longer when:
●
The room temperature is high.
● Less cooling operation, e.g. in winter.
● Many food products are stored.
●
Refrigerator is defrosting.
● The door is frequently opened.
●
When you restart the ice making operation.
● Energy saving mode is in operation.
The clarity of clear ice is declined under the following
conditions
● Ice making is carried out for the fi rst time.
●
Large amount of food are stored in the other compartments.
● Energy saving or Express freezing is in operation.
● The temperature is set higher or lower than the initial
temperature adjustment. (Refrigerator : 3°C, Freezer : -18°C)
SJ-FS79V_TINS-B373CBRZ 12JT [EN]Sec1:29 Sec1:29 SJ-FS79V_TINS-B373CBRZ 12JT [EN]Sec1:29 Sec1:29 7/30/12 2:02:00 PM 7/30/12 2:02:00 PM