19
LED TV
Connecting power
1
If your power cord is not permanently connected to your TV, connect it to the power connector on your TV.
2
Connect the power cord to a power outlet.
Installing remote control batteries
Open the back of your TV remote control and insert two AAA batteries, observing the proper orientation. Reattach the back
cover.
on page
explains how to use the remote control in each of your TV’s operating modes.
Aiming the remote control
• Point the remote control towards the remote sensor on the front of your TV.
Caution
• Your TV should only be operated from the power source indicated on
the label.
• Always unplug the power cord from the power outlet when you will not
be using your TV for an extended period of time.
• If the power cord is permanently attached to your TV, do not try to
unplug it from your TV.
Cautions
• Batteries should not be exposed to excessive heat, such as sunshine,
heat registers, or fire.
• Battery chemicals can cause a rash. If the batteries leak, clean the
battery compartment with a cloth. If chemicals touch your skin, wash
immediately.
• Make sure that batteries are disposed of correctly. Do not burn or
incinerate.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• If the remote control is not going to be used for an extended period of
time, remove the batteries.
