GB-6
ENGLISH
1) Remove all packing materials from the inside of
the oven cavity. Remove all the blue protective fi lm
from the outside of the oven.
2) Check the oven carefully for any signs of dam-
age.
3) Place the oven on a fl at, level surface strong enough
to support the oven's weight plus the heaviest item
likely to be cooked.
Do not place this oven in a position which is not easily
accessible. To position the oven too high can be dan-
gerous because food can not be removed safely.
4) Ensure there is a minimum free space above the
oven of 25 cm.
5) Securely connect the plug of the oven to a standard
earthed (grounded) household electrical outlet.
6) Two same oven models can be installed together
by placing one on top of another. Follow these
instructions.
6-1) Place the oven A and position the oven B on top
of the oven A as shown in the fi gure A.
6-2) Remove the single screw (a) holding the mount-
ing plate A to the rear cabinet of the oven A. And
remove the mounting plate A.
6-3) Remove the single screw (b) from the rear cabinet
of the oven B, as shown in the fi gure A.
6-4) Reinstall the mounting plate A to the rear cabinet
of the oven B with the single screw (b) removed,
as shown in the fi gure A.
INSTALLATION INSTRUCTIONS
WARNING: Always keep the caution sheet (SPECIAL INSTRUCTIONS AND WARNINGS) close to the oven for
your reference.
6-5) Hold the mounting plate A to the rear cabinet of
the oven A with the single screw (a), as shown in
the fi gure A.
6-6) Remove the screw (a) holding the mounting plate
B to the rear cabinet of the oven B. And remove
the mounting plate B from the oven B. See the
fi gure A.
6-7) Install the screw (a) to its position again.
6-8) Remove the screw (c) from the oven A.
6-9) Remove the screw (d) from the oven B.
6-10) Turn the removed mounting plate B over and then
using the removed screw (c) and (d), attach the
mounting plate B, as shown in the fi gure A.
WARNING:
In case where two ovens are installed together by
placing one on top of another,
1) Use the two mounting plates for fi xing the two ovens.
2) Make sure that the power supply cord is not caught
between the two ovens.
3) Do not install more than one oven on top of another.
4) Do not lose the removed screws.
Figure A: How to fi x two ovens
Reat Cabinet
Screw (a)
Screw (c)
Mounting plate B
Oven A
Screw (a)
Mounting plate A
Screw (b)
Rear cabinet
Oven B
Screw (d)
3. Do not use metal utensils, which refl ect microwaves
and may cause electrical arcing. Do not put cans in the
oven.
4. Do not place anything on the outer cabinet during
operation.
5. Do not use the oven near a steamer or a fryer.
NOTE
1. If you are unsure how to connect your oven, please
consult an authorized qualifi ed electrician.
2. Neither the manufacturer nor the dealer can accept
any liability for damage to the oven or personal
injury resulting from failure to observe the correct
electrical connection procedure.
3. Water vapour or drops may occasionally form on
the oven walls or around the door seals and sealing
surfaces. This is a normal occurrence and is not an
indication of microwave leakage or a malfunction.
25 cm
R23AT_OM_NORDIC_5_EN_SE_NO_FI_DK6 6
R23AT_OM_NORDIC_5_EN_SE_NO_FI_DK6 6
2013-12-02 11:15:10
2013-12-02 11:15:10
