Sharp R-1900M, Руководство по эксплуатации

Страница: 18 / 42

17
5 Press the MANUAL/
REPEAT pad and enter
desired multiplication
for A2 at Stage 2.
(Ex: Enter 1, 5 for 0.15.)
1
5
DEF.
DEF.
DEF.
6 Press the MANUAL/
REPEAT pad and enter
desired time for B2 at
Stage 2.
(Ex: Press 2 for
20 seconds.)
DEF.
DEF.
8 Press the MANUAL/
REPEAT pad and enter
the pause timing.
(Ex: Enter 7 for when 70%
of total defrosting time
has passed.) 7
DEF.
7 Press the POWER LEVEL
pad and enter desired
power level for PL2 at
Stage 2.
(Ex: Enter 2 for 20%)
2
DEF.
DEF.
DEF.
DEF.
DEF.
10 Press the START pad.
Procedure Display
11 Press the STOP/CLEAR pad to exit from
the Custom Setting Function.
9 Press the POWER LEVEL
pad and enter desired
power level for PL3 at
Stage 3.
(Ex: Enter 1 for 10%)
NOTES:
1. See the table for Microwave Power Level on page 9 and
The Pause Timing on page 16.
2. You can enter minus numbers for B1 and B2 at steps 3
and 6.
In that case,
press the MANUAL/REPEAT pad twice at step 3 or 6
( is displayed.) and enter desired time for or B1
and B2 at Stage 1 and 2.
Press the MANUAL/REPEAT pad again to enter positive
numbers. ( is displayed.)
Saving Memories
* Memory 0 - 9 are programmed as factory settings. See
the table of Programmed Memories on page 7.
* Memories must be programmed before memory cooking
can be used.
Memory banks
Dual Digit: Memory 0-99
Single Digit: Memory 0-9
Repeat Digit Input: Memory 0-29
Max. cooking stages: 4 stages
Setting time and power level for Single
Stage
<Single Digit Input>
* Suppose you want to set 1 minute at 70% with memory
2.
1 Press the SET MEMORY pad
twice within 2 seconds.
NO.
2 Enter memory number.
3 Press the MANUAL/REPEAT pad.
4 Enter cooking time.
NO.
6 Enter power level.
5 Press the POWER LEVEL pad.
7 Press the SET MEMORY pad to
save memory.
8 Press the STOP/CLEAR pad to exit.
Procedure Display
1
X 2
2
NO.
1 0 0
2
7
R-1900M [EN].indd Sec1:17 R-1900M [EN].indd Sec1:17 9/29/08 1:36:35 PM 9/29/08 1:36:35 PM