4
REMOVE THE PLATEN ROLLER
Fig. 10
[PARTS LIST]
No.
PARTS NAME
Q’ty
E-RING
2
PF-GEAR
2
BUSHING
2
PLATEN ROLLER "J"
1
PLATEN ROLLER "R"
1
PT-HOLDER
1
E-RINGs (for bushing)
2
[DISASSEMBLY METHOD]
1) Remove the E-RING
and the PF-GEAR
.
2) Remove the E-RINGs (for bushing)
. Remove the BUSHINGs
.
3) Remove the PLATEN ROLLER "J"
, PLATEN ROLLER "R"
and the PT-HOLDER
.
[Cautions to be taken when reinstalling]
1. How to tell PLATEN ROLLER "J"
from PLATEN ROLLER "R"
As shown in the figure below, the PLATEN ROLLER "J"
has
a black line on it.
The two PLATEN ROLLERs have different polishing directions
of the rubber roller. Pay attention to the direction when installing
them.
Fig. 11
2. LUBRICATIONS
Apply grease on the PLATEN ROLLER "J"
, PLATEN
ROLLER "R"
, and PT-HOLDER
in the points indicated
below.
Fig. 12
4
5
1
2
3
6
1
2
3
( PLATEN ROLLER "J" )
( PLATEN ROLLER "R" )
without black line
with black line
4
4
Apply grease (G36)
on the
PLATEN HOLDER
shaft, 4 mm in width.
Apply grease (G36)
inside the bushing.
( PLATEN ROLLER "R" )
( PLATEN ROLLER "J" )
( PT-HOLDER )
