CHAPTER 6 DISASSEMBLY AND ASSEMBLY
•
This chapter mainly outlines the procedure for disassembling the
printer. It is advisable to reinstall the printer in the reverse order
from disassembly, referring to "Cautions to be taken when install-
ing."
•
Some easy steps have been omitted.
•
Only part names are described without indicating their part codes.
For the part codes, refer to the Parts Guide.
[Cautions to be taken when working on the printer]
1) The parts which need to be greased are indicated in "Cautions to
be taken when reinstalling." Whenever such a part is replaced
with a new one, grease it before installing.
Lubrication interval (rough guide)
•
Every 6 months
•
Every 2 years or 2,000,000 lines of printing
•
Parts code of lubricant
Lubricant type
PARTS CODE
PRICE RANK
G36
00BB703600001
AU
2) Use caution not to have the gear chipped or deformed when
removing or reinstalling.
3) Do not touch directly the printing head.
4) Be sure to wear an earth band to ground your body.
1
REMOVE THE CUTTER45 and
H-COVER45
Fig. 1
[PARTS LIST]
No.
PARTS NAME
Q’ty
CUTTER45
1
H-COVER45
1
SCREW (M2
×
8)
3
CAUTION LABEL
1
[DISASSEMBLY METHOD]
1) Remove the CUTTER45
and H-COVER45
:
Using a Phillips screwdriver, remove the three SCREWs
.
Remove the CUTTER45
and H-COVER45
.
The H-COVER45
carries the "CAUTION" label
.
1
2
3
4
