Sharp PN-Y326 Скачать руководство пользователя

Страница: 17 / 53

Preparing the Remote Control Unit

Remote control sensor out

Point the remote control toward the remote control sensor on the front of the monitor.

16.4 feet

(5m)

10º10º

16.4 feet

(5m)

16.4 feet

(5m)

16.4 feet

(5m)

10º 10º

For the monitor in landscape orientation

For the monitor in portrait orientation

10º
10º

Remote control

sensor

Remote

control sensor

10º

Remote control sensor in

The remote control can be operated even when the remote control sensor is stored inside the monitor.

Point the remote control toward the remote control sensor on the bottom of the monitor (or the right side of the monitor if using

portrait orientation).

For the monitor in landscape orientation

For the monitor in portrait orientation

Remote control sensor

Remote

control sensor

35º

9.8 feet

(3m)

35º

10º

9.8 feet

(3m)

9.8 feet

(3m)

9.8 feet

(3m)

10º10º

10º
10º

10º

TIPS

• Do not expose the remote control unit to shock by dropping or stepping on it. This could lead to a malfunction.

• Do not expose the remote control unit to liquids, and do not place it in an area with high humidity.

• The remote control unit may not work properly if the remote control sensor is under direct sunlight or strong lighting.

• Objects between the remote control unit and the remote control sensor may prevent proper operation.

• Replace the batteries when they run low as this may shorten the remote control’s operation range.

• If a fluorescent light is illuminated near the remote control unit, it may interfere with proper operation.

• Do not use it with the remote control of other equipment such as air conditioner, stereo components, etc.

TIPS

• When the batteries become exhausted, replace them with

new (commercially available) batteries.

• The supplied batteries (R-6 (“AA” size) x 2) may become

exhausted quickly depending on how they are stored.

• If you will not be using the remote control for a long time,

remove the batteries.

• Use manganese or alkaline batteries only.

1. Press the cover gently and slide it in the direction of the

arrow.

2. See the instructions in the compartment and put in the

supplied batteries (R-6 (“AA” size) x 2) with their plus (+)

and minus (-) sides oriented correctly.

3. Close the cover.

Installing the batteries

Remote control operation range

Содержание PN-Y326






















































Результаты поиска

Содержание PN-Y326

Отзывы:

Похожие инструкции для PN-Y326

Бренды по названию

Популярные бренды

Sharp PN-Y326, Руководство по эксплуатации

Результаты поиска

Содержание PN-Y326

Отзывы:

Похожие инструкции для PN-Y326

Бренды по названию

Популярные бренды