Sharp PN-V551 страница 58 Скачать руководство пользователя

Страница: 58 / 66

Troubleshooting

If you are experiencing any problem with your display, before
calling for service, please review the following troubleshooting

tips.

There is no picture or sound.

•  Is the power cord disconnected? (See page 16.)
•   Is the main power switch off? (See page 19.)
•   Is the monitor in standby mode (the power LED illuminating

in orange)? (See page 19.)

• Make sure correct input mode is selected. (See page 21.)
• If any external equipment is connected, make sure the

equipment is operating (playing back).

Remote control does not work.

• Are the batteries inserted with polarity (+,-) aligned? (See

page 18.)

• Are the batteries exhausted?
• Point the remote control unit toward the remote control

sensor. (See page 18.)

• Is the menu display hidden or is operation disabled? (See

page 37.)

• Is the PN-ZR01A (optional) remote control sensor box

disconnected? (See Page 15.)

• If the main unit is connected to multiple monitors, is the RS-

232 cable disconnected? Has the ID No. been set?

Sound from left and right speakers is reversed.

Sound is heard from only one side.

• Are audio cables connected properly?

There is a picture but no sound.

•  Is the sound muted?
•  Make sure the volume is not set to minimum.
•  Are audio cables connected properly?

Unstable video.

• The signal may be incompatible.
• Try the automatic screen adjustment when the

D-SUB[RGB] or DVI-I (analog) are used.

The video from the PC/AV HDMI input terminal does not

appear properly.

• Is the setting for HDMI of INPUT SELECT on the SETUP

menu correct? (See page 29.)

• Is the HDMI cable HDMI standard compliant? The monitor

will not work with cables that are not standard compliant.

• Is the input signal compatible with this monitor? (See page

62.)

The video from the DVI-I input terminal does not appear

properly.

• Is the setting for EDID SELECT (DVI-I) of INPUT SELECT

on the SETUP menu correct? (See page 29.)

• Is the input signal compatible with this monitor? (See page

62.)

• Turn off the power to the connected equipment and then

turn the power on again.

• If the monitors are connected in a daisy chain, turn off the

power to all the monitors connected in a daisy chain and
then turn the power on again.

The video from PC/AV D-Sub input terminal does not

appear correctly.

• Is the setting for D-SUB of INPUT SELECT on the SETUP

menu correct? (See page 29.)

• Is the input signal compatible with this monitor? (See page

62.)

The video from the DisplayPort does not appear properly.

• Is the input signal compatible with this monitor? (See page

62.)

A black frame is displayed around an image generated

from the HDMI input terminal.

• Is the over-scan setting of your graphics card correct? Set

the graphics card properties.

Control buttons do not work.

There is no picture.

• Load noises from outside may be interfering with normal

operation. Turn off the power and turn it on after waiting at
least 5 seconds, and then check the operation.

The input mode changes automatically.

• When the AUTO INPUT CHANGE is ON and no signal

is present in a selected input mode, the AUTO INPUT

CHANGE automatically changes the selected mode to a
mode where a video signal is present.

The input mode may change in the following cases:

- When a computer is in standby mode.
- When video play is stopped with a playback device.

Power LED flashes red.

“STATUS [xxxx]” appears in the corner of the screen.

• Hardware has a problem. Turn off the monitor and request

repair from your SHARP dealer.

(When STATUS ALERT is set to OSD & LED. This varies

depending on the setting.)

When “AUTO DIMMING” is displayed.

• When the internal temperature of the monitor rises

excessively, the brightness of the backlight automatically

decreases in order to prevent a further temperature rise. If

you attempt to use

to adjust the brightness while

the monitor is in this state, “AUTO DIMMING” is displayed
and you cannot change the brightness.

• Remove the cause of the excessive temperature rise.

The monitor makes a cracking sound.

• You may occasionally hear a cracking sound from the

monitor. This happens when the cabinet slightly expands

and contracts according to change in temperature. This
does not affect the monitor’s performance.

Содержание PN-V551



































































Результаты поиска

Содержание PN-V551

Отзывы:

Похожие инструкции для PN-V551

Бренды по названию

Популярные бренды

Sharp PN-V551, Руководство по эксплуатации

Результаты поиска

Содержание PN-V551

Отзывы:

Похожие инструкции для PN-V551

Бренды по названию

Популярные бренды